Validated & Accessible Dental Curing Solution

Open Validated Workflow
Effortless curing with fully validated profiles of over 15 materials.

Safety Prioritized
Advanced curing technology to meet the highest biocompatibility standards.

Fast, Reliable Curing
Safely post-cure most printed appliances within minutes.

Worryfree Curing With Open Validated System
CURE+ comes with a fully validated preset of curing profiles for industry-leading resin manufacturers, so you can cure confidently without the hassle.

Boosting Biocompatibility and Mechanical Properties
365, 385, and 405 nm - Broad wavelength range to ensure optimal curing for any dental materials.
Flash Curing - High-intensity flashing for deeper and faster post-curing without the risk of overcuring the surfaces.
Heated Enclosure - Controlled heating at 60°C for faster curing and enforcing tighter polymer bonding for better mechanical properties.
Turbo Curing
Effortlessly post-cure dental appliances like crowns, bridges, surgical guides, and occlusal splints to biocompatibility standards in just minutes—delivering the speed essential for same-visit treatment.

Surgical Guide
Flash Cure & Heat 5 mins

Crown and Bridge
Flash Cure & Heat 11 mins

Occlusal Splint
Flash Cure & Heat 10 mins

Hybrid Denture
Flash Cure & Heat 11 mins

Dental Model
Cure & Heat 10 -15 mins

Denture Base
Flash Cure & Heat 20 mins

Gingiva Mask
Normal Cure 20 - 25 mins
Reliable Curing in Just 4 Steps

Step 1
Place printed appliances into the curing chamber.

Step 2
Select the curing profile for your material.

Step 3
Start the post-curing process and let CURE+ do its thing.

Step 4
Post-polish as needed, and your printed appliances are ready for use.
Technical Specifications
Flash curing and controlled heat
365, 385, 405 nm
110 W
36 LED lights
80 W, 60 °C
12 x 12 × 5 cm
23 x 33.5 x 26 cm
5"
7.3 kg
100-240V ; 50-60Hz